Flexible Metal Corner Tape (Nantong Fiberglass Composites Co., Ltd.,China)

Detailed Product Description

How to use:
1.Cut flexible metal corner tape into one of the two strips with a knife to score
and bend.The distance between your cuts will depend on how about a radius you
want to achieve.Apply generous coat of joint compound to a depth of 1''/8'' covering
both sides of the corner the same time.With the metal facing the wall.Fold tape
at the center margin and press firmly into the compound.
2.Once the corner is embedded.Remove excess compound with taping knife.After the
first coat dries,sand lightly,apply finish coat and feather edges two inches beyond
edges of the first coat.If needed apply a second coat 6''-10''wide on each side
of corner.When dry,sand lightly if needed.The wide galvanized steel strips act
as a guide to ensure straight,reinforced angles for both ''inside'' and ''outside''
corner needs.
Packing:
10 rolls in a carton